Large Solenoid Voltage Connector

Large Solenoid Voltage Connector

This is the large-style voltage connector used on many European solenoid coils. The female terminal slots are spaced 19 mm apart (left to right), with the ground terminal slot 7 mm above the line, and the inner core can be removed and rotated to reposition the terminal slots as needed for your wiring.

SPECIFICATIONS

• Female terminal slots spaced 19 mm apart
• Ground terminal slot 7 mm above the terminal line
• Rotatable inner core for terminal repositioning

COMPATIBILITY

• Fits: solenoid coils using the large-style connector footprint, including many Fluid-o-Tech vibratory pump solenoids
• Replaces: OEM large solenoid voltage connector
• Works with: solenoid coil assemblies

INSTALLATION

Moderate DIY - loosen the fixing screw, pop off the old connector, transfer your wiring to the new insert in the same position (photograph the original wiring first), then reassemble and tighten the wire restraint nut.

Electrical items, special-order parts, and solenoids are final sale; see our return policy or contact info@espressoparts.com with questions.

PRO TIPS

• If your solenoid is on a Fluid-o-Tech vibratory pump, note that some of these connectors contain a small diode (FR306 DC or FR307) on terminals 2 and 3 - this diode is not included with this connector and we don't have a source for it separately, so save the old one if your pump needs it.
• Document your original wire colors and their left/right position relative to the ground terminal before disassembly - getting polarity backwards on reassembly is the most common mistake with this repair.