Rancilio Group Head Screen Screw

Rancilio Group Head Screen Retaining Screw (M5 x 15mm)

The small slotted hex-head screw that clamps the group head screen against the dispersion block. It's a low-cost part, but a stripped or missing one is a common reason a group screen won't seat flat.

SPECIFICATIONS

• M5 x 15mm, slotted hex head

COMPATIBILITY

• Fits: Rancilio group heads that use the standard hex-head screen screw
• Works with: Rancilio group head screen (R_39) and group head gasket (R_17); also included in our Silvia Maintenance Kit and Commercial Solenoid Group Head Kit

INSTALLATION

Simple hand-tool job, a small hex driver or flat screwdriver and a few minutes.

PRO TIPS

• Snug it down firmly but don't crank on it, the screw threads into a relatively soft brass dispersion block, and over-tightening is the most common way to strip the hole.
• If the screen still won't sit flat after replacing the screw, check the screen itself for warping before assuming the screw is at fault.