The Easy Siphon - 3/8 in.

• Starts siphon with a single stroke
• Made from BPA-free acrylic plastic
• Includes anti-sediment tip
• Easy to dissasemble for cleaning and drying
• 7/8" outer diameter fits glass carboys, 1-gallon jugs or Growlers

The name says it all! No more struggling with all the different techniques to get a siphon started. The Easy-Siphon will get your transfer started quickly and with zero fuss. Simply submerge the the siphon, pull the inner tube up about halfway, then pump down to start the siphon. New design features 7/8" OD racking tube to better fit carboys, 1-gallon jugs, or growlers.

To prolong the life of your Easy Siphon, make sure that every time you assemble the unit, the inner walls of the outside acrylic tube and the O-Ring are wet.

Comes with 3/8" cane and 24" racking tube. you must purchase a length of line separately. 
Tubing: 3/8" ID tubing is preferred for the best seal, but it is a very tight fit. Soaking the tubing in hot water makes it easier to push onto the racking cane. Once installed, it can also be difficult to remove and may need to be carefully cut off. 5/16" ID tubing is much easier to install and remove, but the looser fit can allow air into the line during transfer.

Maximum Temperature: 140°F (60°C)

Instructions: 

1. Sanitize and rinse your Easy-Siphon. 
2. Get the inner tube gasket and the outer tube wet. 
3. Attach the curved siphon to a hose. 
4. Submerge the end of Easy-Siphon into your container. 
5. If bottling directly, attach the correct bottle for the tubing you are using and place it inside your bottle wand. Otherwise place the the tubing into the container you're racking to. 
6. Pull the inner tube up about 7" until the liquid fills the tube. 
7. Pump the inner tube down and siphon will begin. 
8. Pull out inner tube and sanitize Easy-Siphon for storage.